Friendly reminder: Place the antenna as far as possible from the PCB board and close to the edge of the casing.
Product introduction
【Basic parameters】
Network type: IEEE 802.11n or 802.11 b/g
Frequency range: 2.4 to 2.49 GHz
Maximum gain: 4dBi (SONY adhesive) can attach the antenna to the outer casing
Standing wave ratio: less than 1.5
Input impedance: 50 Ohms
Rated power: 30 dBm
Use feeder: 1.13mm wire length 150MM
Antenna interface: IPEX interface
Antenna size: 48MM*7.5MM*1.0MM
pStandard IEEE 802.11n and 802.11 b/g
Frequency Range 2.4 to 2.49 GHz
Peak Gain 4dBi
VSWR <1.6
Feed Impedance 50 Ohms
Power Handling 30 dBm
Interface One set of soldering pads for 50 ohm,
1.13mm cable
Antenna Dimensions 48MM*7.5MM*1.0MM

